Hikvision Dome Camera

Product Detail

DS-2CD2110F-I(W)(S)

1.3MP ir dome network camera

1.3MP 1/3'' Progressive scan CMOS

1.  Support dual streams

2.  Up  to 30 meters IR range,nightvision

3.  -S: Two-way audio

4.  -S: Audio/Alarm I/O 

5.  -W: Support Wi-Fi

6.  IR cut filter with auto switch 

7.   DC12V & PoE

8.  Built-in Micro SD/SDHC/SDXC card slot, up to 128 GB

9.  Ingress Protection level: IP67,can use for indoor and outdoor

10. IK10,vandalproof

11.Support CE, FCC certificate






Camera  DS-2CD2110F-I
Image Sensor:	1/3" Progressive Scan CMOS
Signal System:	PAL/NTSC
Min. Illumination:	0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR
	0.028 Lux @ (F2.0, AGC ON) ,0 Lux with IR
Shutter time:	1/3 s to 1/100,000 s
Lens:	4mm@ F2.0 (2.8mm, 6mm optional)
Lens Mount:	M12
Adjustment Range:	Pan:0° - 355°, Tilt: 0° - 75°, Rotation: 0-355°
Day& Night:	IR cut filter with auto switch
Wide Dynamic Range:	Digital WDR
Digital noise reduction:	3D DNR
Compression Standard
Video Compression:	H.264/MJPEG
H.264 code profile:	Baseline Profile / Main Profile
Video bit rate:	32Kbps~8Mbps
Audio Compression:	G.711/G.722.1/G.726/MP2L2
Audio bit rate:	64Kbps(G.711) /16Kbps(G.722.1)/16Kbps(G.726) /32-128Kbps(MP2L2)
Dual Stream:	Yes
Image
Max. Image Resolution:	1280x960
Frame Rate:	50 Hz: 25 fps (1280 × 960), 25 fps (1280 x 720)
	60 Hz: 30 fps (1280 × 960), 30 fps (1280 x 720)
Image Settings:	Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC:	Yes, zone configurable
ROI:	support
3D DNR:	support
Network
Network Storage:	NAS (Support NFS,SMB/CIFS)
Alarm Trigger:	Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols:	TCP/IP, UDP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
	NTP,UPnP,SMTP,IGMP,802.1X,QoS,IPv6,Bonjour
General Function:	User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask
System Compatibility:	ONVIF, PSIA, CGI, ISAPI
Interface
Audio:	1-ch audio in, Mic in/Line in;
	1-ch audio out
Communication Interface:	1 RJ45 10M / 100M Ethernet interface
Alarm:	1 alarm I/O
Alarm Input:	1
Alarm Output:	1
On-board storage:	Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Wi-Fi Specification (-W)
Wireless Standards:	IEEE802.11b, 802.11g, 802.11n
Frequency Range:	2.4 GHz ~ 2.4835 GHz
Channel Bandwidth:	20/40MHz Support
Modulation Mode:	802.11b: CCK, QPSK, BPSK
	802.11g/n: OFDM
Security:	64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS
Transmission Rate:	11b: 11Mbps
	11g: 54Mbps
	11n: up to 150Mbps
Wireless Range:	50m(depend on environment)
Protocols:	802.11b: CCK, QPSK, BPSK
	802.11g/n: OFDM
General
Operating Conditions:	-30 °C ~ 60 °C (-22 °F ~ 140 °F)
	Humidity 95% or less (non-condensing)
Power Supply:	12 V DC ± 10%, PoE (802.3at)
Power Consumption:	Max. 5W
Impact Protection:	IEC60068-2-75Eh, 50J; EN50102, IK10
Weather Proof:	IP67
IR Range:	Up to 30m
Dimensions:	F111 × 82 (4.4” × 3.2”)
Weight:	500g (1.1 lb)

EASY TO CONNECT

Hikvision’s Easy IP solution offers Wi-Fi cameras, Wi-Fi NVRs, and PoE NVRs for easy connection. The system features automatic IP address allocation, auto detection, auto connection, and easy access.

For some locations, deploying an Ethernet network for IP cameras is a constraint. A complete solution that incorporates Wi-Fi cameras and NVRs addresses this problem.





? Quality Control

1. All raw materials are carefully selected and inspected.
2. Advanced production equipment is used and routinely inspected and serviced. 
3. All operators and employees are thoroughly trained.
4. All products have passed the European Union RoHS standard and are CE, FCC certified.
5. All products must pass strict inspection before delivery.

6. Professional logistics personnel are employed to control the damage during the physical distribution of products.

? Cost Control

1. Our factories have been accredited in terms of ISO9001, and our advanced management system increases efficiency and reduces costs.

2. Bulk purchasing has reduced our material cost, and massive production have lowed each product cost.

3. Advanced production equipment such as our SMT production line provides a highly efficient production rate.
4. Reduction of any unnecessary surplus of products by strict stock control reduces our warehousing costs.

? Strong Tech Support

1. Presale: product consultation and solution design can be provided. 
2. Sale: spares parts can be provided at a certain discount. Delivery time is approximately two weeks. Please note that delivery times may vary depending on the destination and transportation method. 
3. After sale: We offer a 2-years warranty, which includes maintenance and technical support for all the products. Within the warranty period, exchanges and free maintenance are provided. If any quality issues occur, please contact us for technical support via telephone, email, or any method available on our site. 
4. We can also provide project designs, customized products, online training, in-person training, and OEM services.