WiFi IR Cube Camera

Product Detail

DS-2CD2410F-IW

1MP IR Cube Network Camera

1. HD720p Video 
2. Built-in Wi-Fi optional

4. 3D DNR & DWDR & BLC
5. Good Choice for home  use
6. PIR sensor,support motion detection
7. POE

8. IR range up to 10m



Camera
Image Sensor:	1/4" progressive scan CMOS
Signal System:	PAL/NTSC
Min. Illumination:	0.01Lux @(F1.2,AGC ON) ,0 Lux with IR
	0.028Lux @ (F2.0, AGC ON) ,0 Lux with IR
Shutter time:	1/3 s to 1/100,000 s
Lens:	4mm@ F2.0, Angle of view: 55°
	(2.8mm, 6mm optional)
Lens Mount:	M12
Day& Night:	IR cut filter with auto switch
Wide Dynamic Range:	Digital WDR
Digital noise reduction:	3D DNR
Compression Standard
Video Compression:	H.264/MJPEG
H.264 code profile:	Main Profile
Video bit rate:	32Kbps~8Mbps
Audio Compression:	-S: G.711/G.722.1/G.726/MP2L2
Audio bit rate:	64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)
Image
Max. Image Resolution:	1280 × 720
Frame Rate:	50 Hz: 25 fps (1280 x 720), 25 fps (704 x 576), 25 fps (640 x 480)
	60 Hz: 30 fps (1280 x 720), 30 fps (704 x 576), 30 fps (640 x 480)
Image Settings:	Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
BLC:	Yes, zone configurable
ROI:	support
3D DNR:	support
Network
Network Storage:	Built-in Micro SD/SDHC/SDXC slot, up to 128G, NAS(NFS, SMB/CIFS)
Alarm Trigger:	Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols:	TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
	NTP,UPnP,SMTP,IGMP,802.1X,QoS,IPv6,Bonjour
General Function:	One-key recovery, Anti-Flicker, three streams, heartbeat, mirror, password protection, video
	mask, Watermark, IP address filtering
System Compatibility:	ONVIF, PSIA, CGI, ISAPI
Interface
Communication Interface:	1 RJ45 10M / 100M Ethernet interface
Alarm Input:	1
Alarm Output:	1
Wi-Fi Specification (-W)
Wireless Standards:	IEEE802.11b, 802.11g, 802.11n
Frequency Range:	2.4 GHz ~ 2.4835 GHz
Channel Bandwidth:	20/40MHz Support
Modulation Mode:	802.11b: CCK, QPSK, BPSK
	802.11g/n: OFDM
Security:	64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS
Transmit Power:	11b: 17±1.5dBm @ 11Mbps
	11g: 14±1.5dBm @ 54Mbps
	11n: 12.5±1.5dBm
Receive Sensitivity:	11b: -90dBm @ 11Mbps (Typical)
	11g: -75dBm @ 54Mpbs (Typical)
	11n: -74dBm (Typical)
Transmission Rate:	11b: 11Mbps
	11g: 54Mbps
	11n: up to 150Mbps
Wireless Range:	50m(depend on environment)
Protocols:	802.11b: CCK, QPSK, BPSK
	802.11g/n: OFDM
General
Operating Conditions:	-30 °C ~ 60 °C (-22 °F ~ 140 °F)
	Humidity 95% or less (non-condensing)
Power Supply:	12 V DC ± 10%, PoE (802.3at)
Power Consumption:	5.5W MAX
IR Range:	10 meters
PIR:	Angle: 80°
	Range: 10m
Dimensions:	72.3×89.9×131.3mm (2.85”×3.54” ×5.17”)
Weight:	400g(0.88lbs)

How to set the WIFI camera


1) Wireless Router Configuration ‘SSID No’: Letter or number filled by user;

‘Channel’: ‘6’ frequency band is normally used, which can be selected according to current environment; Choose’54Mbps (802.11g)’ in ‘Mode’. Enable ‘Enable Wireless’ and ‘Enable SSID broadcast’ column; Use ‘Security Configuration’ according to current environment; when it is enabled, ‘security type’, ‘security option’, ‘secret key type’ and ‘secret key content’ should be configured.

2) Login IPC using IE browser to set the wireless parameter. Take 10.9.6.212 as an example.

 a) Fill in “http:// IP of IPC” in address bar, such as “http://10.9.6.212”.

 b) Configuration-advanced configuration-network-TCP/IP, set IPv4 address, gateway address and mask address same as the router in your network and save the configuration

 c) Switch from LAN to WLAN, disable DHCP, set the IPv4 configuration of WLAN same as LAN,and save the configuration



? Quality Control

1. All raw materials are carefully selected and inspected.
2. Advanced production equipment is used and routinely inspected and serviced. 
3. All operators and employees are thoroughly trained.
4. All products have passed the European Union RoHS standard and are CE, FCC certified.
5. All products must pass strict inspection before delivery.

6. Professional logistics personnel are employed to control the damage during the physical distribution of products.

? Cost Control

1. Our factories have been accredited in terms of ISO9001, and our advanced management system increases efficiency and reduces costs.

2. Bulk purchasing has reduced our material cost, and massive production have lowed each product cost.

3. Advanced production equipment such as our SMT production line provides a highly efficient production rate.
4. Reduction of any unnecessary surplus of products by strict stock control reduces our warehousing costs.

? Strong Tech Support

1. Presale: product consultation and solution design can be provided. 
2. Sale: spares parts can be provided at a certain discount. Delivery time is approximately two weeks. Please note that delivery times may vary depending on the destination and transportation method. 
3. After sale: We offer a 2-years warranty, which includes maintenance and technical support for all the products. Within the warranty period, exchanges and free maintenance are provided. If any quality issues occur, please contact us for technical support via telephone, email, or any method available on our site. 
4. We can also provide project designs, customized products, online training, in-person training, and OEM services.